GT-U7 / NEO-6M GPS Wardriving Module
A serial GPS receiver module for tagging your ESP32 logs with real coordinates — the missing piece in any wardriving or field-survey build.
| Price | A$36.48 A$36.48 · US$24.00 · 24.00 USDC |
|---|---|
| Payment | AUD card/bank · USDC (Base) · Monero |
Compliance: shipped as general-purpose electronics; radio/EMC regulatory status documented per SKU (AU/NZ/US/UK/EU).
About this accessory
A WiFi scan log with no location data tells you nothing when you review it later. This GT-U7/NEO-6M class GPS receiver module fixes that: it outputs standard NMEA sentences over UART, so any ESP32, Arduino, or Raspberry Pi build can parse position, altitude, and time and stamp them onto whatever it is logging. It is the module used in most wardriving and access-point-mapping projects — pair it with an ESP32 running a scanning firmware and you get a map of what you found and where. Low power draw means it runs happily from a powerbank alongside your main board, and the external antenna improves fix quality over bare ceramic patches.
Features
- GT-U7 / NEO-6M class receiver with standard NMEA output over UART
- Tags wardriving and survey logs with real coordinates and timestamps
- Works with ESP32, Arduino and Raspberry Pi — plain serial, no special drivers
- External active antenna for better fix quality
- Low power draw — runs from a powerbank alongside your main board
Specs
| Receiver class | GT-U7 / NEO-6M |
|---|---|
| Output | NMEA over UART (9600 baud default) |
| Antenna | external active antenna included |
| Supply | 3.3-5 V logic compatible |
In the box
- GPS receiver module
- External active antenna
- Pin headers
In stock — ships fast